1 | Thermal performance of oscillating blade with various geometries in a straight channel | E. Izadpanah, M. Yazdanian, M. H. Hekmat, Y.Amini | Journal of Applied and Computational Mechanics | 2022 |
2 | Enhancement of the mixing efficiency of double T-shaped micromixers using a combined passive scheme | K. Mehdizadeh, M. H. Hekmat, M. A. Aghasi | Chemical Engineering & Processing: Process Intensification | 2024 |
3 | Effect of vortex-induced vibrations on mass transfer enhancement in a channel with two cylinders in tandem arrangement | Z. Far , E. Izadpanah, M. H. Hekmat, M. B. Rabiee | Ocean Engineering | 2023 |
4 | Vortex-induced vibration effects on mixing performance | Z. Far, M.H. Hekmat, E. Izadpanah | Chemical Engineering and Processing: Process Intensification | 2022 |
5 | Comprehensive study of heat transfer enhancement in turbulent nanofuid fow in skewed corrugated channels | H. Shafiei, M. H. Hekmat, S. Saharkhiz | Journal of the Brazilian Society of Mechanical Sciences and Engineering | 2022 |
6 | A novel design of split and recombination multilayer micromixers with excellent hydraulic and mixing performance based on the baker's transformation, Chemical Engineering and Processing - Process Intensification | M. A. Aghasi, M. H. Hekmat | Chemical Engineering and Processing - Process Intensification | 2022 |
7 | The influence of energy storage container geometry on the melting and solidification of PCM | Mohamad Hamed Hekmat, Mohamad Hosein Khaksar Haghani, Ehsan Izadpanah, Hosein Sadeghi | International Communications in Heat and Mass Transfer | 2022 |
8 | Effect of Nanofluid Flows on Heat Transfer Intensification of Corrugated Channels with an Oscillating Blade | M. H. Hekmat, S. Saharkhiz | Chemical Engineering and Processing: Process Intensification | 2022 |
9 | Numerical investigation on two-degree-of-freedom vortex-induced vibration of a circular cylinder in power-law fluids | A. Ashouri - E. Izadpanah - M. H. Hekmat - Y. Amini | Journal of Non-Newtonian Fluid Mechanics | 2021 |
10 | Heat transfer characteristics of laminar and turbulent wavy channel fow in the presence of a stationary or rotating blade | M. H. Hekmat, S. Saharkhiz, M. Babaie | Journal of the Brazilian Society of Mechanical Sciences and Engineering | 2021 |
11 | Numerical and experimental investigation of air flow behavior and H2S gas emission through an inclined traversed tunnel | M. H. Ahmadi, M. H. Hekmat | Journal of the Brazilian Society of Mechanical Sciences and Engineering | 2021 |
12 | A genetic algorithm-based approach for numerical solution of droplet status after Coulomb fission using the energy conservation method | M. H. Hekmat, M. Rahmanpour, M. Mahmoudi, S. Saharkhiz | Journal of Computational Applied Mechanics | 2020 |
13 | Numerical study of the oil whirl phenomenon in a hydrodynamic journal bearing | M. H. Hekmat, G. A. Biukpour | Journal of the Brazilian Society of Mechanical Sciences and Engineering | 2019 |
14 | Numerical investigation of the mixed convection of a magnetic nanofluid in an Annulus between Two Vertical Concentric Cylinders under the influence of a non-uniform external magnetic field | M. H. Hekmat, M. B. Rabiee, K. K. Ziarati | Journal of Thermal Analysis and Calorimetry | 2019 |
15 | Effects of nanoparticles volume fraction and magnetic field gradient on the mixed convection of a ferrofluid in the annulus between vertical concentric cylinders | M. H. Hekmat, K. K. Ziarati | Applied Thermal Engineering | 2019 |
16 | Numerical investigation of turbulence characteristics and upstream disturbance of flow through standard and multi-hole orifice flowmeters | M. Moosa, M. H. Hekmat | Flow Measurement and Instrumentation | 2019 |
17 | Investigation on the thermal mixing enhancement in a T-junction pipe | M. H. Hekmat, S. Saharkhiz, E. Izadpanah | Journal of the Brazilian Society of Mechanical Sciences and Engineering | 2019 |
18 | Numerical Simulation and Parametric Study of the Convection Heat Transfer in a Micro-Channel Heat Sink with the Elliptical Pin Fins | M. H. Hekmat, A. Ansari, M. Rahmanpour, S. Saharkhiz | Mechanical Engineering Journal of Tabriz University | 2019 |
19 | Numerical simulation of mixing process in T-shaped and DT-shaped micromixers | E. Izadpanah, M. H. Hekmat, H. Azimi, H. Hoseini, M. Babaie Rabiee | Chemical Engineering Communications | 2018 |
20 | Effect of cylinder geometry on the heat transfer enhancement of power-law fluid flow inside a channel | H. Sadeghi, E. Izadpanah, M. Babaie Rabiee, M. H. Hekmat | Journal of the Brazilian Society of Mechanical Sciences and Engineering | 2017 |